EXCELLENT DESIGN WITH PROVEN ACCURACY & RELIABILITY
CONQUEST 2-46 DOUBLE ROW LINE BORING MACHINE COMPLETE WITH ALL STANDARD FEATURES, INCLUDING, TWO ROWS OF 23 SPINDLES, TWO 2HP BALDER MOTORS, PNEUMATIC OPERATION WITH FOOT PEDAL CONTROL, ADJUSTABLE FLIP STOPS, FACTORY SAFETY GUARDS, PARTS/OPERATORS/SAFETY DECALS/ SAFETY MANUAL
TWO ROWS OF 23 SPINDLES WITH 32MM SPACING.
BORES FROM BELOW WITH ALL THE WELL KNOWN ADVANTAGES:
A: WORKPIECE REMAINS STATIONARY.
B: CHIPS FALL AWAH FROM THE WORKPIECE.
C: OUTSIDE FACE OF WORKPIECE IS UPWARD AND FAR LESS PRONE TO SCRATCHING.
D: NO TABLE TO KEEP CLEAR OF CHIPS.
E: SAFER BECAUSE BITS ARE BELOW THE WORKPIECE.
SPINDLES ARE EQUIPPED WITH 10MM COLLETS.
TWO GEAR DRIVEN BORING UNITS PROVIDED WITH DIRECT DRIVE MOTORS.
DIGITAL READOUT IS PROVIDED FOR ADJUSTMENT OF BORING HEADS BY PRECISION SCREWS.
FENCE RAIL IS MADE OF 23/8" SQUARE ALUMINUM EXTRUSION.
FENCE IS PROVIDED WITH AN ACCURATE METRIC SCALE AND FOUR STOPS DESIGNED FOR ACCURACY AND REPEATABILITY.
AIR OPERATED INDEXING PINS ARE PROVIDED, THEREBY ALLOWING FOR CONTINUOUS DRILLING OF SYSTEM HOLES WITHOUT THE USE OF FLIP STOPS.
EITHER ONE OR BOTH BORING UNITS MAY BE OPERATED.
INDICATOR LIGHTS ARE PROVIDED TO SHOW WHICH HEAD(S) ARE ACTIVATED FOR USE.
ADJUSTMENTS ARE PROVIDED TO REGULATE THE FEED RATE OF EACH BORING HEAD.
DRILLING SEQUENCE IS INITIATED BY A FOOT CONTROL.
1: FOOT PEDAL IS DEPRESSED.
2: AIR HOLD-DOWNS MAKE CONTACT WITH THE PANEL AND BORING UNIT(S) RISE, MOTORS ARE STARTED.
3: BORING REACHES MAXIMUM DEPTH, UNIT(S) LOWER, MOTORS ARE SWITCHED OFF AUTOMATICALLY AND AIR HOLD-DOWNS RETRACT.
AIR OPERATED HOLD-DOWNS ARE MOUNTED ON A SLIDEWAY OVER THE BORING UNITS AND QUICKLY ADJUSTED TO THE PROPER POSITION DIRECTLY OVER EACH BORING UNIT.
BORING UNITS ONLY RUN DURING THE BORING CYCLE.
BORING UNITS ARE SUPPORTED BY 23/4" x 41/2" STEEL GUIDES AND TWO 2" DIA. PRECISION GROUND RODS TO MAINTAIN ALIGNMENT AND PROVIDE STABILITY DURING THE BORING SYCLE.
INDIVIDUAL BORING NEADS ARE PROVIDED STABILITY AND ALIGNMENT FOR VERTICAL TRAVEL BY TWO 1&3/16" PRECISION GROUND RODS.
PRIMARY BASE/SUPPORT OF EACH BORING UNIT IS MADE OF HEAVY-DUTY CASTINGS.
MAIN FRAMEWORK OF THE MACHINE IS CONSTRUCTED OF HEAVY (THICK WALL) TUBULAR STEEL FOR STRENGTH AND ALIGNMENT.
SAFETY KEY LOCK-OUT IS PROVIDED TO DISALLOW UNAUTHORIZED USE.
ALL ELECTRICAL CONTROLS ARE MOUNTED IN A CENTRAL CONTROL PANEL CONVENIENTLY FACING THE OPERATOR.
MOTORS ARE EQUIPPED WITH MAGNETIC CONTROLS AND OVERLOAD PROTECTION.
MADE IN THE U.S.A.
NUMBER OF SPINDLES: 46 (TWO ROWS OF 23)
SPINDLE CENTERS: 32MM
MAXIMUM SPINDLE CENTERS: (1st - 23rd) 273/4" (704MM)
DISTANCE BETWEEN HEAD CENTERS: MAXIMUM 253/8" (645MM)
DISTANCE BETWEEN HEAD CENTERS: MINIMUM 51/8" (129MM)
MAXIMUM DISTANCE FROM FENCE TO FRONT SPINDLE LINE: (THROAT DEPTH) 287/8" (645MM + 90MM)
BORING STROKE: 3"
BORING DEPTH: 0 - 3"
FENCE LENGTH: 10.5' (3200MM)
TYPE OF SPINDLE DRIVE: GEAR DRIVEN
NUMBER AND ROTATION OF SPINDLES: 22RH & 24LH
MOTORS: TWO 2HP/3PH/230-460V
SPINDLE RPM: 3600RPM
AIR PRESSURE REQUIRED: 100PSI
WEIGHT: (NET) 1250LBS.
OVERALL SIZE: (EXCLUDING FENCE) 43'L x 50"D x 58"H
